I am using an IR transceiver in my design.This IC is working at 3.3V supply.This IC need not be on always so I decided to give a control to it's shut down pin (Pin no 5,Shutdown Input. Active low).A transistor switch is used for this purpose.When the switch is ON the transceiver will be active...
Hi everyone,
I'm new in here. I designed a controller card project and the card can switch some devices with relays, dfplayer mini to play sounds from sdcard, external bluetooth music player card is connected to the circuit. cd4066 used for audio switching between dfplayer and Bluetooth audio...
Hello everyone,
I have a problem and I thought I should post it here because I can't quite get the hang of it.
I was tasked to make a circuit that is made of only NOR-gates. Seemed simple at first but then the restrictions came in.
The circuit needs to be made out of 4 NOR gates with 2 inputs...
I started the basics of PCB and doing schematics around 6 weeks ago in my Computer Engineering Drafting and Design class. We used EasyEDA online tool to create the SCH and PCB for our assignments/activities. Our project now is to combine the circuits that we have made before into one system so...
I have this test circuit, which has this signal:
V1 may change from 1 to 30 V, V2 may change from 0 to 4 V peak to peak.
I need to clip the signal at about 3 - 4 V to feed it to an Op Amp, which has a split supply voltage of about -5 and +5 V.
So I added two zener diodes and the signal was...
PROBLEM:
24 SMD COB LED has too much illumination drop off over 3 hours. Currently powered by four 3V button batteries.
PREFERRED SOLUTION:
Get this battery powered LED to perform more consistently over a few hours.
THE STORY:
I’m working on a little project at home for a custom...
I need to design notification system for my third-year of collage
Project ideas;
Should be able to post new notifications on website(mobile App)
Should be able to send notification as text messages to members who don't have internet access
Can any one help me where to start
I was given a powerbeats. I found that the speaker and the buttons are heavily damaged. But somehow I was succeded to connect it with a nother speaker. Again I found that the control buttons are not working. I found two wires connected with the control board to motherboard(the main receiver...
Hi!
Here is the project:
I bought a spotlight which contains 4x 50W LED Lamps. The spotlight is powered by a 28VDC battery. My vision is to control the spotlight with a mobile app (turn on/off and blink the LED's). Also the space inside the spotlight is limited (10cm X 7cm X 4cm at most since...
Hi, I hope someone on this forum can help me.
I need to convert a relay signal to push button pulse(s). When the relay closes, a single pulse (of about half a second duration, same as pressing a button) is required. When the relay opens, two pulses are required (same as pressing a button...
Common +5V, common ground, decouplers between?
Hi all.
In a distributor's catalogue selling the 510 Scanner IC, (touch-sensitive MIDI), a simplified schematic of a generic (no brand) keyboard controller is added.
Looking at the way the miniature circuit is drawn, it appears that all 20x 0.1uF...
Hello Friends,
Please have a look in the video below. I am working in a project like this. This guy presents his code and circuit in his video description, code is perfectly compiling but the circuit is not good. Please help me in designing a good circuit for this project with all buttons and...
Newbie Alert!
I have a fairly simple schematic for Bob Beck's plant growth stimulator.
I bought some 6 x 7cms prototyping board (with simple row and column copper padded holes matrix) and now have all the electronic components that I need to complete construction.
I have looked at several...