Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Hello,
I have a LCD Board for a Raspberry Pi and it has a few pushbuttons on the side. They are SMD tactile switches.
I want to move them into a separate location, either a PCB Board or a mounting place.
My question is that if I cand find compatible connectors, that can pe soldered on the old...
On a TRS connector, there are 3 connections: Left, Right, and Ground. I wonder how these connections function when sending audio signals.
Here are my questions:
1. Do the left/right connectors send both the positive and negative portions of the waveform, or is some form of DC offset applied...
So I bought a 1986 Ford ranger that needed the body harness completely rebuilt . As I'm ripping out the old harness I noticed something that looks like a wire nut with about 6 wires inside of it. Has anyone seen anything like this? Was this Normal for fords back then ? Or was this the result of...
Hello guys i have a Dell Inspiron N5110. My cdrom sata connector was ripped a while ago. Yesterday i decided to fix it because i wanted to buy a ssd and connect my hdd to cdrom socket. But i realized that 2 pins on sata board side was shorted together because their trace was exposed. it was the...
Can anyone identify this port, i want to buy a male connector so i can wire a video out lead. Unfortunately the original cable is now discontinued.
Thanks
Andy
Hi, real beginner here...
I'm looking to convert a 6-pin LAN-style connector (is that 6P6C? RJ12?) to 3.5mm audio jack to connect an amp to speakers etc. I've attached photos so you can see what I'm talking about, but the pin colour from 1-6 is: blue, yellow, green, red, black and white. I have...
Hi All
I'm having a dilemna at the moment, I have designned a battery balancing circuit and need connector for this that are rated at 10A max per contact perivously I used a SAMTEC IPBT connector which met my requirement the only problem was the height with the connector and the mating half had...
Hi All
This is my first post and i am wondering if i can get some help. I am creating a project and looking for preferably a 2 or 3 pin waterproof target/pad connector something like the image below, I do not mind the connection type to the PCB it is more about ensuring that the target is flat...
Title says it all. I have attached pictures of the socket and header in question. I was only able to find 2 markings on either of them. I am assuming "CND" is the series and "7" referes to the number of positions. I have already searched through the following with no results:
Digikey, Mouser...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
