Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Hello everyone! I have a task to choose ADC that will have at least 10 MSPS sampling rate and will be able to connect to STM32U575 directly. I very new with this topic, was searching through and found several ones that look like they might work.
Wanted to ask if someone can provide a feedback...
Hello all, this is one of my first electronic schematics and I'm trying to make sure everything looks good (electrically) before I order board and components. Another set of eyes on this to criticize and give constructive feedback would be great and point out any issues or mistakes my circuit...
Hi There,
I am working with a MCU STM32F405VET for any particular purpose. Lets a at this time firmware code has burn on MCU. Lets talk about HW issue.
Take a look the datasheet here https://www.qdatasheet.com/datasheet-download/190671/1/ST-Microelectronics/STM32F405VET6
In my design portion a...
Hello eveyone,
I have a wired analog Accelerometer (KS943B100) IEPE output, BNC connectors. It is actually connected to an NI cDAQ-9171 with serial connection and then to the PC with labVIEW.
My objective is to make this application wireless by connecting the sensor to an MCU, send the data...
Hi,
I have been looking all over the Internet and the MCU that best matches what I'm looking for is the ESP32. However, those ADCs specs are not enough for my project:
I'm in need of a Microcontroller that has WiFi (integrated 2.4GHz antenna) and at least 12 input ADC pins (>=12 bit...
Hi,
I'm fairly new to microcontrollers and have read multiple guides, although still asking the question.
I have used Arduino for quite a long time and have developed some product concept. I am only 14 years old though.
I am currently developing a wearable project, therefore size, weight, and...
Using the SK-S7 Synergy kit from Renesas, I was working on the ThreadX GUIX example. In the application note that Renesas provides, it tells me to increase the stack size from 1024 to 2048. Why would I need to do that? I thought it was preferable to keep the stack size as small as reasonably...
I'm working on dimming a high-wattage LED (50W--12V/4.17amps) with a 3.3V micro-controller. The solution that has worked so far is by using a low-side (PNP) MOSFET to drive the LED and a NPN transistor to drive the MOSFET via the 3.3V signal from the MCU. At 488hz PWM I can dim the LED light...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
