Should I replace it? Is it damaged, or will it work? Is it safe to test with the power source of 4.5V? I have a feeling something might go wrong if connected to power. But if I should test it, perhaps there's a way you can recommend for testing with multimeter?
I don't have a replacement at...
Hello
Does anyone know any solderless cables to use in a microcontroller project that actually hold? Maybe some sort of clip on the connector that locks in place.
Thank you in advance!
Hello all I have been attempting a repair on a Archt one speaker for about a month now and I just can’t figure it out. I’ve probed around, I’ve tested the speakers in a home theater just to make sure they work and they do just fine, but when put together I get no sound through BT or through Aux...
I have an old soldering station but sudenly 1 or 2 of the resistor burn but idont know how to read board or skematic, I just need the value of the resistor need to replace, I provide some picture link. so any one analize what is I am saying.
AEOLUS 936 Soldering Station (11yrs old i think)...
Hi,
I've been trying to learn how to solder but have not managed so far.
Shortly explained:
I use:
* Temp controlled soldering station(usually about 400 celsius)
* Cleaning stuff that works well
* iron-tip w/ good surface area
* tried 2 different types of lead free solder(1mm thick and 0.35...
Hey guys and gals,
I am in the process of repairing a HyperX Cloud II that had the minijack broken off in an unfortunate accident. I am experiencing numerous issues with this repair, I can get all the copper wiring separated just fine, get the insulation burned off, clean the wires, pre-tin...
Hello Everyone, I am having problems soldering a wire on a LED cob light. I had or though I had it soldered but it keeps coming off one side. The + is sticking so far but the - side will not. Does anyone know of a conductive paste that will work and not cost more than the Chinese chip cost...
Hello,
First of all, I'm totally inexperienced, and just someone trying to salvage a device if it's doable.
I was trying to disconnect the HDD cable out of its port, but the whole thing came off with the connectors still soldered to it. I got some advice telling me it's an easy fix but I'm...
Hi Looking for some advice
I've got 2 HDMX Jam wireless speakers (HX-P230A) both had a charging fault due to damaged micro USB connector.
I've desoldered and replaced one which now works fine.
The other speaker has 2 missing board pads for pin 2 & 3, it seems like the 5 pins exit the...
hello I'm a newb here just made the acct to try and find this voltage regulator,, I can find everything but this one.. its marked 01A and theres a 5 sideways after the number ... type is APR3001-15A sot-23 I need this or something that will do the same if anyone can help that's awesome thank..
I'm repairing an HTC Desire 816 that had a broken screen and LCD. I fixed all of that but the battery terminal was some how pulled away from the circuit board. I need to solder the terminal back onto the circuit board in order to charge the phone. However, I don't have a soldering iron. Is there...