Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

voltage regulator

  1. J

    Choosing and wiring the components of a solar-powered driveway gate

    Hi all, I am neither an artist nor an electronics person but I'm giving it my best shot today and every day. I have a battery-powered driveway gate which charges by a solar panel. I chose to get the cheapest system possible and then spent almost an equal amount of money upgrading it, and...
  2. V

    LM317 And The Magic Smoke

    I'm designing a project which involves a microcontroller sending data over SPI to two SN74HC595N shift registers which, then control some level shifters to turn on and off some 12v end devices. (The MC and the register circuit are on two separate boards) I want to power the shift registers and...
  3. K

    How to Select Rated Voltage for Power Circuit

    I am designing a power circuit, using a voltage regulator to transfer 18V input to 5V output. I am a bit confused about the rated voltage for the regulator. Can I use 19V or 20V regulator for this circuit? Of course there is transient protection and over voltage protection for this 18V input...
  4. Lin4Fun

    IFC Engine- & enviroment analog sensordata to NME2000 bus through Teensy3.6 (marine application)

    Hello, I am working on a DIY project to interface a lot of signals to a NMEA2000 bus to be able to controle an older analog engine and other sensors with a new multi function display. To do so I am using Arduino / Teensy microcontroller together with a NMEA2K library. I started to design the...
  5. heri

    Make Turntable with Stepper Motor

    It's still part of the same project I've posted before but different parts, this is a turntable with a motor and voltage regulator. On YouTube they use synchronous motor, short story I bought stepper motor with driver in my local store, I intend to run this stepper motor like dc motor that I...
  6. B

    Voltage Controlled Voltage Sources (VCVS) - Power a Piezo Buzzer

    Hi, I am trying to power a Piezo Buzzer between 3.3VDC and 5VDC. The voltage is being adjusted so the sound is low (at 3.3VDC) and loud(at 5VDC). My attachment can be a little misleading. Alarm_low doesn't suggest the volume is low, just the number of beeps. Same holds true for Alarm_medium...
  7. Sergeant_Solder

    Looking for a 3pin surface mount voltage regulator APR3001-15a SOT-23 or equivalent ??

    hello I'm a newb here just made the acct to try and find this voltage regulator,, I can find everything but this one.. its marked 01A and theres a 5 sideways after the number ... type is APR3001-15A sot-23 I need this or something that will do the same if anyone can help that's awesome thank..
  8. merooo2811

    Adjustable Dc Voltage Regulator

    Homemade Adjustable Dc Voltage Regulator by circuit, and you will learn about Dc Voltage Regulator and circuit by practical design and we will use lm350k. About adjustable dc voltage regulator design You will be able to edit output voltage by Variable resistance in the circuit, and the range of...
  9. M

    6V DC motorcycle regulator

    I have a vintage motorcycle (1934 Levis 500cc model D) with a BTH mag generator which I have just fitted. The dynamo is a small permanent magnet DC type, but chucks out about 6v at tickover rising to about 15v when revved. I need a voltage regulator for this machine to avoid blowing all my bulbs...

New Articles From Microcontroller Tips

Back
Top