Hi all. I'm having issues with an A.O. Smith 1hp dual voltage reversible capacitor start induction run motor. I'm trying to wire the motor to a run switch for the turntable on a John Bean 8950 tire changer. Someone was messing with it before me and did not mark any wires to the switch and all...
So I bought a 1986 Ford ranger that needed the body harness completely rebuilt . As I'm ripping out the old harness I noticed something that looks like a wire nut with about 6 wires inside of it. Has anyone seen anything like this? Was this Normal for fords back then ? Or was this the result of...
Sorry no real TLDR. Hi all I'm an apprentice mechanical engineer (So a failed EE). I've had this project that is both about the wiring for an electric guitar and some more complicated wiring. It is probably at this point so far beyond me and apparently all of the guitar community (I've been on...
This was likely wired in the 70's here in Canada. I've been studying 3-way circuits, 2-way circuits, general practices and circuit flow for the last 2 hours trying to understand why it's wired this way, because ultimately I'd like to install a dimmer switch that's supposed to have a green...
I'm trying to fix my headset(left side) and I don't understand how the wiring works. Can anyone help me which color of the wire should I connect the board(AG, R, B, G, R, V). I tried to research it but I'm really confused.
Thank you!
Hi Everyone!
I have reached a point of semi-desperation with a project on which I am working for over a year now. There is one issue I doesn't seem to be able to fix.
I have a nixie clock pcb which drives 6 apa106 rgb leds. I am trying to wire it up to be able to turn off three of these leds...
Hi,
I am looking for help with the wiring involved with controlling the speed of a motor on LabVIEW through a PC rather than changing it manually on my motor control card. I currently have the motor running in both CW and ACW directions using LabVIEW.
I know I must desolder the potentiometers...
Hi guys, I am looking for some electrical help on how to add a secondary fusebox to my car. I have a 1989 Maserati 430, these era cars came out of the factory with underpowered fuseboxes prone to over heating. Well, my box was toast when I bought the car and now that ive had the car a few months...
Hi, real beginner here...
I'm looking to convert a 6-pin LAN-style connector (is that 6P6C? RJ12?) to 3.5mm audio jack to connect an amp to speakers etc. I've attached photos so you can see what I'm talking about, but the pin colour from 1-6 is: blue, yellow, green, red, black and white. I have...
I am attaching a diagram of how I have wired the driver side window with relays. The problem is that although the relays are clicking when a ground is applied to pin 85, the windows are not moving. I previously wired power windows and I believe I used the same setup as shown in the attached...
I have a small drone camera that I'm trying to link to a set of LCD glasses, thus creating night vision glasses. Only downside is that I'm a complete novice to electronics, and have no idea how to attach the two.
Images: https://imgur.com/a/aIFPS
Any help with this is greatly appreciated.
Cheers,
Hey Guys, im making my own tilt servo bracket similar to the one in the picture attached, as part of a school project for an adjustable wing for my whole miniature go kart, but it is due in a few days and i do not own a servo controller/tester or have the time to buy one in time. So im thinking...