Try a Dallas Semi (Maxim Integrated) DS32KHz unit which are available as free samples from the website. This will get you a very accurate and temp compensated 32.768 KHz timebase . Feed the output into a CD4020 ripple counter to obtain 2 Hz out. Then divide this with a 1/2 of a 4013 flip-flop to provide you with the accurate 1 Hz required to drive the one's of seconds in the digital clock. You could also use one of the outputs on the 4020 as a high frequency to set your clock.
Agreed. However, if he can't afford a Rubidium source he cane use the suggestion I made. I have been building digital clocks of various types since the 60's. My newer (last 10 years) clocks use this time base implementation which is more accurate than the 60 Hz line frequency (according to Maxim Integrated).
Agreed. However, if he can't afford a Rubidium source he cane use the suggestion I made. I have been building digital clocks of various types since the 60's. My newer (last 10 years) clocks use this time base implementation which is more accurate than the 60 Hz line frequency (according to Maxim Integrated).
I have seen several posts on various sites asking the same question. I was just trying to provide a little helpful information for others with the same delima.
I have seen several posts on various sites asking the same question. I was just trying to provide a little helpful information for others with the same delima.