I just found a power supply I would like to build. the address **broken link removed**
has jpg pics that are not clear enough to ID all the components. Has anyone had experience with this circuit?
Any help with part ID would be greatly appreciated.
More questions..the 0.3 resistors R5-R8 what type do you suppose they are? C6 47/36...C4 10/25. I don't know what this is reference to. Should I suppose to use .5 W resistors?
Collin55...your help is appreciated. I notice on the ckt that c1 and c3 are 103 and 104 respectively. I don't know what this is. Sorry for all the newbee ?'s.
Collin55...your help is appreciated. I notice on the ckt that c1 and c3 are 103 and 104 respectively. I don't know what this is. Sorry for all the newbee ?'s.
You do realize you will need about an 800VA transformer not to mention large heat sinks,thermal management fans, large caps able to handle the rms current. And a host of other considerations. This wont be cheap and probably isn't something you should be building if it's your first PSU.
EDIT
actually you would be looking at about a 900VA transformer.