I am trying to make control heater for particular temperature more than 500 degree celcius....I want to know which is the best way to measure this....using thermocouple type-k....which amplifier would be best for amplifying signal from type-k thermocouple....
I heard about ad-595....but it requires higher supply for more than 300 C ....any best way to do this....
Type-k table for temp. v/s voltage..
https://srdata.nist.gov/its90/download/type_k.tab
https://www.electro-tech-online.com/custompdfs/2010/01/emfk_c.pdf
by seeing voltage level I will need atleast gain=100 for good resolution...
I heard about ad-595....but it requires higher supply for more than 300 C ....any best way to do this....
Type-k table for temp. v/s voltage..
https://srdata.nist.gov/its90/download/type_k.tab
https://www.electro-tech-online.com/custompdfs/2010/01/emfk_c.pdf
by seeing voltage level I will need atleast gain=100 for good resolution...
Last edited: