Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Ads1100

Status
Not open for further replies.
S

schneiderj

New Member
Hello,

I am using an ADS1100 from TI to convert voltage from a pressure sensor.

At the request of the microcontrolleur (18F4520), the ADS send the OK and accept the control byte.

During reading, the ADS send the OK and then the 3 bytes as expected (2 bytes for the low and high data's word) and the control byte. But all of them are 0xFF (as read from the microcontroller or with a logical analyser).

Any idea where is that coming from ?

Thanks,
Jean-Marie
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top