Advice for ultrasonic signal processing.

Status
Not open for further replies.
J

JPolo

New Member
Hi everybody! I need to recover the signal captured by 3 or 4 hydrophones and doing the respective signal processing (amplification, filtering, ADC). What kind of microcontroller should I use in order to do that? The recovered signal should be between 25 kHz and 200 kHz.
Thanks!
 
I don't think an MCU can handle filtering for that many signal sources at those frequencies on top of everything else at those bandwidths. Could be wrong though.
 
One example is to record all 4 signals for 10,000 samples then go back and process them in NOT-real time.
There are DSPs that probably can do that in real time. Could use 4 small DSP parts.
A DSP is made to do this job, but is not a good microcontroller for general purpose applications.
 

The dsPIC's are pretty good general purpose micro-controllers (it's just the usual PIC core), I've no idea how they are as DSP's though? - I keep meaning to have a play with one.
 
Status
Not open for further replies.

Similar threads

M
  • Question
I'm trying to reprogram this microcontroller
Replies
2
Views
3K
microbeetle
M
N
  • Question
Some Advice please on older boards
2
Replies
27
Views
6K
NoobyMarty
N
J
  • Question
Does J1939 standard require ECU to transmit binary one's for unused signals in a J1939 message?
Replies
15
Views
5K
jani12
J
F
  • Question
Recommendation as for DC-DC and LDO for ARM and digital ICs.
Replies
0
Views
657
Fahrenheit
F
  • Question
Measuring distance with ultrasonic sensor HC-SR04 (Oshonsoft Basic Compiler).
Replies
4
Views
3K
camerart
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…