I have a power amp mono block which calls for a 60V supply voltage.
I don't have that available and run it on roughly half that supply voltage.
I don't need much amplification to start with and wouldn't mind running the amp always like this but I wonder how the specs change with a change in supply voltage. I am thinking that as long as all the biasing circuitry is happy all that would change is that the amp would start to clip earlier.
But I wonder and wanted the opinion of experienced folks.
As you said as long as the biasing circuit is happy you should be fine, but as you said it'll clip at a lower 'volume' level. One of the benefits of this is the circuit should really last longer as you're barelly loading it compared to what it's capable of.
Google has many articles about crossover distortion that is caused when push-pull output transistors do not have enough bias voltage. There is a "dead" part of the waveform where one transistor crosses the signal over to the other transistor.