Antennas: 434MHz versus 868MHz

Status
Not open for further replies.
earckens said:
EU requirements: I doubt if in the south of France they heard of it, let alone care about.
Click to expand...

Why is it that those who know least about radio consider that it is ok to vomit all over the electromagnetic spectrum, just because they cannot see an immediate problem?

JimB
 
JimB said:
Why is it that those who know least about radio consider that it is ok to vomit all over the electromagnetic spectrum, just because they cannot see an immediate problem?

JimB
Click to expand...
I did not say I don't care. I said what the prevailing attitude is someplace
 
JimB said:
Why is it that those who know least about radio consider that it is ok to vomit all over the electromagnetic spectrum, just because they cannot see an immediate problem?

JimB
Click to expand...
Fortunately, with new technologies such as spread spectrum (CDMA), they have an inherent resistance to jamming, or operation in a noisy spectrum. But yeah, spewing across the EM band is still bothersome.
 
Mikebits said:
Fortunately, with new technologies such as spread spectrum (CDMA), they have an inherent resistance to jamming, or operation in a noisy spectrum. But yeah, spewing across the EM band is still bothersome.
Click to expand...
This thread started with a question about 434 vs 868MHz antennas and still is not resolved (see my prior post).
Why some who feel disagreement about something find it ok to vomit over a thread with unrelated content is beyond my understanding.
 
The only way to know if something will work, is to try it and see.

But I would tend to try the HC-12 modules, and proper aerials, and see how that works - it's a cheap and easy solution.
 
Nigel Goodwin said:
The only way to know if something will work, is to try it and see.

But I would tend to try the HC-12 modules, and proper aerials, and see how that works - it's a cheap and easy solution.
Click to expand...
Hi, ok good idea too, thank you. I do have enough HC12 modules to experiment with in this project as well as try to set one up in a repeater role.
Two RFM95 modules I have will be used in a LORA test; I will let you know the results. It may be several months to get to that because this is when time is available.
 
Status
Not open for further replies.

Similar threads

A
  • Question
Mixing antennas between phone signal booster and WiFi router
Replies
2
Views
12K
azaxi
A
K
  • Question
DSB-SC versus SSB-SC Demodulation, Continued
Replies
16
Views
15K
Kerim
F
3/4 Wavelength Antenna
Replies
2
Views
2K
fuseless
F
F
5/8 Wavelength Antenna Top Loading
Replies
7
Views
5K
fuseless
F
DSB-SC versus SSB-SC demodulation
Replies
17
Views
10K
Kerim
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…