Having problems programming the fuse bit to use the internal clock. I'm using AVR Studio, and AVR Dragon programmer. Tried chips from two seperate sources, same fail error. Guessing it's something I'm doing wrong.
I just started with microcontrollers last December, and have only used Tiny13 in HV programming mode. This is using serial ISP, but in the ZIF socket on the Dragon. So new chip, new programming mode.
Wanted to run some simple test code to see if I can get an LCD display to do something just to see if I'm on the right track.
Figured I'd ask and see if anybody has had problems, and if there is a simplist solution. If the chips are bad, I can try on a Mega48.