Hello,
I have A2212-13 1000KV BLDC motor of Mystery company.
it is not generating a ack EMF which i have seen in PMDC motor.
the bldc has an ESC also which i am not using it.
please tell what to do of it?
A PM BLDC or AC motor should generate a 3ph wave form roughly equivalent to the voltage required to operate it at that particular RPM.
Are you sure it is 1000Kv?
Is it P.M.?
Max.
Oh, now it's clear you meant "volt" (i.e., V), not some other v. Or, maybe I should have added an emoji . And yes, I was aware of the model specification that basically means rpm/V.
The brushless motor in my new model F-16 jet airplane is rated at 13500Kv, not 13500kV. When its 2-cells Li-Po battery powers it at 8.2V it runs its ducted fan at 81000RPM in my hand and much faster when flying fast.
It is an impeller ducted fan and it is inside using the same air intake and exhaust as the jet turbine engine in a real jet airplane. The impeller has 5 blades and is 28mm in diameter. The powerful brushless motor is tiny.
It is an impeller ducted fan and it is inside using the same air intake and exhaust as the jet turbine engine in a real jet airplane. The impeller has 5 blades and is 28mm in diameter. The powerful brushless motor is tiny.
A jet engine is a jet turbine that compresses incoming air with some impellers, mixes it with fuel and it burns creating thrust. For more thrust they shoot more fuel into the output which is called an afterburner and you can see the fire coming out.
A jet engine is a jet turbine that compresses incoming air with some impellers, mixes it with fuel and it burns creating thrust. For more thrust they shoot more fuel into the output which is called an afterburner and you can see the fire coming out.