useing a 555 timer you can make a LED blink and by changing R2 you can change the speed it blinks
then you can add more LEDs in series that all blink at the same speed..
but what if i want to have two LEDs using the same 555 curcuit blink on different speeds?
how would i do that? or would there just have to be two of the curcuits to make two leds blink at differnt times?
thanks for any help
one when output goes high and second one when output goes low.
just insert an LED and resistor between power and output pin.
some great 555/556 circuits **broken link removed**
or a calculator **broken link removed**
if you want to use just one chip then a 556 is doable
a 558 if you want 4-555's in one.
one when output goes high and second one when output goes low.
just insert an LED and resistor between power and output pin.
some great 555/556 circuits **broken link removed**
or a calculator **broken link removed**
if you want to use just one chip then a 556 is doable
a 558 if you want 4-555's in one.