Bosh GSB20-2RE

3

307pavlos

Member

• Jun 29, 2012

• #1

heelo guys,
i'm trying to fix an electric drill i own which one day stopped working. At first i thought the drill switch was broken, so i bought one from ebay.i replaced it with no success and now i'm out of ideas!!

Can you help me where to look and to what part should i pay more attention?

thank you in advance friends!

 

Last edited: Jun 29, 2012

alec_t

Well-Known Member

Most Helpful Member

• Jun 29, 2012

• #2

My guess is the speed-controller IC is fried.

 

3

307pavlos

Member

• Jun 29, 2012

• #3

i see. how does it look like, where in the drill is lying, and how can i test it?

 

S

strantor

Active Member

• Jun 29, 2012

• #4

Brushes.

 

K

KeepItSimpleStupid

Well-Known Member

Most Helpful Member

• Jun 29, 2012

• #5

Here is a diagram of your drill: https://www.ereplacementparts.com/b...1234-hammer-drill-parts-c-128_1032_15778.html Note that it's on its way out for support.

I don;t know if this drill has the brush warning indicator, but I have a Bosch Demolition hammer that does. If the light is on, you have a certain amount of time before it shuts off completely. PS: The demo hammer was really fun to rebuild.

Brushes would have been the first thing I would have checked.

 

3

307pavlos

Member

• Jun 29, 2012

• #6

brushes are the 810 part?

 

K

KeepItSimpleStupid

Well-Known Member

Most Helpful Member

• Jun 30, 2012

• #7

Yes, you just remove items 48 and 16 (x2) and the brushes should fall out with the help of gravity. If the wear gets to the spring, you have real issues. You should be able to inspect the brushes. The Bosh diagram is usually on the net, but Bosch usually has a repair manual available. (usually free by email).

 

Last edited: Jun 30, 2012