So my Vehicle is a 94 Suburban I bought these style tail lights.
**broken link removed**
And here is a Diagram(Old but it still the same as mine) for the tail lights
https://www.chuckschevytruckpages.com/images/1973-1987_chevy_taillightwiring.jpg
First thing, I heard making the LEDs brighter will damage them, makes sense to me but is it ok if it is just the occasional brake?
The ones I bought use the stock tail lights, so there is no problem there, BUT however, the brake/turn signal is now white, which is very bad. The red LEDs are just wired in the marker lights(Did that myself since they won't come on if unless I signal or brake then leaving me with NO red in the rear guaranteed ticket), it came with no ballast or anything to make it work with the signals.
Now here where you guys come in, I need to know(I think its called a 555 timer?) what to build and where to put it in the circuit, to make it work with my signal and brakes. Preferred to have both LED circles blink, even thought defaultly only the bottom Bulb blinks on the stock lights.
Just some notes of how my tail lights work:
Top ones - Markers only do not blink(Not 100% sure but I think they might get brighter with brake)
Middle ones - Blink/Brake and Markers
Bottom ones - (Shouldn't really need to know this since they don't really have an effect on this but w/e) Reverse only obviously
If I can't make this work, I guess I'll have to use the bottom one for turning/brake and the top circle for Markers.