Breakthrough!!!

[Krumlink]

I redesigned the HELLO WORLD program of bills and It worked! It recognized the 16F88 and I had NO errors except a illegal character!!!

;*** WDT reset toggles LED2 (RA7)
	List	p=16F88
	include <p16F88.inc>
	__CONFIG _CONFIG1, 0x2F34
	org		0
	bsf		STATUS, RP0
	movlw	b'00001110'
	movwf	OPTION_REG
	movlw	b'00111111'
	movwf	TRISA
	bcf		STATUS, RP0
	movlw	PORTA, f
	sleep
	end

It says:

ERROR [108] Illegal character (,)

Can you find it?

Please, I would really appreciate some help!!!!!!!!!!!!!!

 

[Krumlink]

Bill, 3v0, Nigel, etc I need help and I am really close to completition!

 

[blueroomelectronics]

What line did it say the error was on?

 

[Krumlink]

Hey bill, 3v0 is helping me over the phone, so I will talk to you later.

 

[kchriste]

The line:
movlw PORTA, f
Should be:
comf PORTA, f
This will toggle all bits on PORTA. I haven't checked for other errors.

 

[Krumlink]

SUCCESS!!!

I got it working! 3v0 helped me a tiny bit and I figured it out! I am so happy! ITS ALIVE!!!

 

[Krumlink]

Here it is

I am going to make a plaque or something and blow this way out of porportitions!

I have it regulated with a 750M05C LDO, and It uses a 16F88. It uses a crappy little red LED that probably has a millicandela rating of about 2

Camera stopped working

There we go got em!

 

[gregmcc]

Nice one.
You sure you didnt take the photo with the LED on and then again with the circuit switched off

 

[Krumlink]

If you notice very closely, nothing is moved, and the connector is still on the 9V. Everything is working perfectly, until the 9V connector leads from radioshack fell off