calibration capacitor

JimB

Super Moderator

Most Helpful Member

• Feb 16, 2023

• #21

peter g said:

how to pm? sorry for my lack of knowledge.

Click to expand...

Click on the envelope icon at the top right hand side of the screen



Then click on "start a new conversation"

Type in a title for the topic
Type in the screen name of the recipient
Type the message
The click "start conversation"

Then you are sending a PM (Private Message)

JimB

 

Upvote 0 Downvote

P

peter g

Member

• Feb 17, 2023

• #22

hi all, well i finished construction and programmed the hex code into the micro. this meter measures esr and capacitance at the same time in circuit. just need to calibrate.

 

Upvote 0 Downvote

Reloadron

Well-Known Member

Most Helpful Member

• Feb 17, 2023

• #23

I got your PM. Just shoot me a few rough ranges and I'll get you some caps out in the mail.

Ron

 

Upvote 0 Downvote

P

peter g

Member

• Feb 17, 2023

• #24

range from 470 to 1000mfd.

 

Upvote 0 Downvote

P

Pommie

Well-Known Member

Most Helpful Member

• Feb 17, 2023

• #25

Are you saying Milli Farads of Micro Farads?

Mike.

 

Upvote 0 Downvote

P

peter g

Member

• Feb 17, 2023

• #26

micro farads. uf

 

Upvote 0 Downvote

Reloadron

Well-Known Member

Most Helpful Member

• Feb 17, 2023

• #27

OK, I'll dig through a few and get a reasonable range spread. Give me a few days and as soon as I get them out I'll shoot you a PM with a USPS tracking number. I'm in Cleveland, Ohio so figure several days to you.

Ron

 

Upvote 0 Downvote

P

peter g

Member

• Feb 17, 2023

• #28

o.k. ron, thanks much.

 

Upvote 0 Downvote

Reloadron

Well-Known Member

Most Helpful Member

• Feb 25, 2023

• #29

I sent you some random caps measured with a precision bridge. Sorry I am a little late. Had a few unexpected issues including my home PC threw up. I mailed them USPS so give them a few says.

The caps are taped to a paper with the actual values written below each cap. I also sent you a PM. Again. apologies for the delay.

Ron

 

Upvote 0 Downvote

P

peter g

Member

• Feb 25, 2023

• #30

o.k. thanks. will be looking for them.

 

Upvote 0 Downvote