Supply is about 9mA.
The BTB04 is no longer in production at ST. Needs 10mA in Q1/Q3/Q4. I am not good with triacs! What about Q2?
Does the red LED have to be on while the triac is on?
>If the triac needs 10mA and the LED needs 10mA but they are exclusive to each other, then there is a chance.
>Is the LED switched on/off? or does it stay on all the time? (all the time .... I have a way that does not load the supply)
> Do you drive the gate of the triac 100% of the time. The 220uF cap (I used 470) can supply 40mA for 1/4 of the time.