Hi again everyone. Got another rare part I need to try to identify. It has the number 4048-001 printed on it and what appears to be a smudged Motorola logo.
I think it may be a ferrite core inductor. It is used in the dwell angle circuit card of the Repco 646 tune up machine. It seems to have 3 coils under the plastic wrap but only 5 very fine wires attached to the 5 terminals. It has a bakalite tube centre with the coils wound around it and a ferrite centre. Problem with it was it had been broken off the base which broke all the fine wires. I glued it gack together and was able to solder all the fine wires back onto the closest terminals but that at best is just a guess as to if it will still work. I think it may also be an OEM special as I cannot find any information about it. Any assistance is greatly appreciated. Thanks.