Exactly Sir! I am from Rawalpindi, Pakistan. One more question sir. Which one among LM338K and LM340 would be better to implement this 2A dc current source project and why?
You need to do some of your homework yourself. Draw schematics of 2 amp regulators using both parts, and calculate the power dissipation of the required resistor. You should be able to deduce the answers to your questions from these calculations.
it is a really simple adjustable 5a constant current power supply.
I've built a few for bench testing high power leds. The one I use the most is based on National's LM1084 ldo regulator, and I have the peak current limited to about 1.1a using a pair of 2.2ohm resistors in series.
You need to do some of your homework yourself. Draw schematics of 2 amp regulators using both parts, and calculate the power dissipation of the required resistor. You should be able to deduce the answers to your questions from these calculations.
Sir please tell me about it (LM338K or LM340 and why?). Even if power dissipation is the only factor then which one will be better. And also if there is any other factor.
I think if I asked my lecturer for approval of a circuit diagram just two days before the finished article was due to be handed in, he'd laugh openly at me and tell me to come back next year!
Sir please tell me about it (LM338K or LM340 and why?). Even if power dissipation is the only factor then which one will be better. And also if there is any other factor.
For a given supply voltage, the 338 will have higher voltage compliance on the output than the 340. In other words, the 338 can handle a higher resistance load than the 340.
I think if I asked my lecturer for approval of a circuit diagram just two days before the finished article was due to be handed in, he'd laugh openly at me and tell me to come back next year!