Dimarson DM-R906

Status
Not open for further replies.

Edmond

Member
Hi!

I’ve got this DVD recorder. After switch on from stand by, it switches of in 5 seconds. The drive (DML-200) is working fine in PC. The PSU voltages are OK. So I’m looking for service manual and working firmware for it. I found for DM-R905, but that is not good for this.

Thanks for help!
 
Never mind the PSU voltages, check the ESR of the electrolytics in the PSU, it's a VERY common problem.
 
Yes, but I measured them with oscilloscope too. There is no noise on the voltages. On the +12V, there is a noise of 16mVpp, but it can’t cause the problem.
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…