Diode

Status
Not open for further replies.

gearmate

New Member
I am repairing my integrated AKAI AM-U03. Diode position D1b on the schematic is labeled 1S2473, which i need to change, but to the look it has a green band which have me to believe that it should be instead 1S2472 same as the opposed channel. Am I right.
Can i use 1S2473 anyway despite the fact that D1 is 1S2472, will they match.
 

Attachments

  • akai 1.jpg
    86.9 KB · Views: 271
  • akai 2.jpg
    134.2 KB · Views: 259
  • aka 3.jpg
    116.3 KB · Views: 264
Why do you wish to change the diode?, have you broken it?.

Assuming you have broken it?, do you know what it does in the circuit? - as it's near the output hydrids it 'may' be used for setting the quiescent current for the output stage, if so it's absolutely critical that the exact correct diode is used.

EDIT: I've just downloaded the manual, it looks like you're OK, and the diode is part of the over current protection, so won't be at all critical.
 
Last edited:
Thanks Nigel,
Yeah broken it. but i meant D1b from the manual.
But is that right just for curiosity that the 2 diodes are different.
 
Last edited:
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…