Boncuk New Member Nov 1, 2009 #1 Hi all, I found an interesting film about DIY solderstop mask. All texts are German. If translation is needed I will provide the English text for each text page in the film. Required material for the solderstop mask: - High power (450W) laminator - Dynamask Laminate - negative developer (Natriumcarbonate, 10g/l at 40deg/C) - UV exposure box - soft brush to expedite developing (toothbrush or similar) There are direct links to the material required in the article. Here is the link: **broken link removed** Greetings Boncuk Last edited: Nov 1, 2009
Hi all, I found an interesting film about DIY solderstop mask. All texts are German. If translation is needed I will provide the English text for each text page in the film. Required material for the solderstop mask: - High power (450W) laminator - Dynamask Laminate - negative developer (Natriumcarbonate, 10g/l at 40deg/C) - UV exposure box - soft brush to expedite developing (toothbrush or similar) There are direct links to the material required in the article. Here is the link: **broken link removed** Greetings Boncuk
G günter New Member Nov 2, 2009 #3 Hello Boncuk, >"If translation is needed I will provide the English text for each text page in the film" can i have the translation of my homepage too? sorry, im good in making soldermasks, but not in translating ;-) Günter
Hello Boncuk, >"If translation is needed I will provide the English text for each text page in the film" can i have the translation of my homepage too? sorry, im good in making soldermasks, but not in translating ;-) Günter
Boncuk New Member Nov 2, 2009 #4 Hello Günter, hopefully you have a contact address on your homepage. If not please contact me via email. Of course I'll be glad to help you. Remark: Next time you make a movie get the microphone away from the adhesive tape roller. When unreeling the tape and tearing it off it sounded like a lightning strike on my home theater. Email address is posted in a PM to you. Regards Hans
Hello Günter, hopefully you have a contact address on your homepage. If not please contact me via email. Of course I'll be glad to help you. Remark: Next time you make a movie get the microphone away from the adhesive tape roller. When unreeling the tape and tearing it off it sounded like a lightning strike on my home theater. Email address is posted in a PM to you. Regards Hans