AtomSoft
Well-Known Member
I never really found this information but i thought others might look for it.
I took a picture of a small DREMEL bit kit. This kit comes with 7 bits sizes are:
1/32" EDIT: 1/32 = 0.79375 mm (.8mm)
3/64"
1/16"
5/64"
3/32"
7/64"
1/8"
I would recommend 1/32 for actual PCB pin/part holes. Its actually smaller than Premade PCBs like from radioshack and other places. The 1/8 is good for screw/mount holes. and other sizes can be used for various things.
Heres the picture:
**broken link removed**
I took a picture of a small DREMEL bit kit. This kit comes with 7 bits sizes are:
1/32" EDIT: 1/32 = 0.79375 mm (.8mm)
3/64"
1/16"
5/64"
3/32"
7/64"
1/8"
I would recommend 1/32 for actual PCB pin/part holes. Its actually smaller than Premade PCBs like from radioshack and other places. The 1/8 is good for screw/mount holes. and other sizes can be used for various things.
Heres the picture:
**broken link removed**