error 0x008 P16PRO19

error 0x008 P16PRO40 -- SOLVED !!

hi,

i want to ask what error is this?? (0x008)
i thought my PIC was BUSTED??

Software: - WinpicProg (V 1.95e) by Sir Nigel
Hardware: - P16Pro40 (7407)
Device: - PIC16F628

Settings of Winpiprog is 7407 from hardware setting pull down menu
voltage from VPP = 13.65V, VCC = 5.2V
Vpp is on(invert) = 13.65V

i got the error when i toggle the Write PIC, then i read the device

:1000000007309F008316F030850083128501851F1D
:020010001020BE
:02400E00FF3D74
:00000001FF

i can erase that hex, but if write again the program, it's the same error.

any help??

hi again it writes successful now!!! but there a difference in hex

as per Sir Nigel's HEX tutorial 1 the hx is
:020000040000FA
:1000000007309F008316F030850083128501851F1D
:100010001020051F1320851E1620051E19200728F5
:100020008501851500348501051500348501851489
:080030000034850105140034C1
:02400E00183D5B
:00000001FF

then i preview the written hex, this could be the result
:1000000007309F008316F030850083128501851F1D
:100010001020051F1320851E1620051E19200728F5
:100020008501851500348501051500348501851489
:080030000034850105140034C1
:02400E00183D5B
:00000001FF

i don't know what is wrong with this

Those are the same!. Don't know what the first line is for?, but it's not relevent.

Thank You very Much Sir , i am now getting to start my PIC self study programming, i've ben in your site from time to time also in WinPicProg Forums, someday i will share my experience about building this home made P16pro40 in your forum.

thanks & God Bless