Received a bunch of lo-cost ESCs and matching Brushless Motors, but all the connecting wires are black. Im used to seeing the 3 output wires from the ESCs with red black and white wires, and matching colored wires on the motors. This time all connecting wires are black.
Im pretty certain that I can figure out the ESCs wiring, as its just a PCB board, and I can trace it...but how do I figure out the Motors wiring.???
What are the drive (ESC?) spec unless there is electronic commutation then it should not matter, just a question of different rotation if wrong.
PDF shows back fed stator output and corresponding commutation phasing if used.
Max.
I think all 3 wires to the brushless motor are the same color because the direction of turning does not matter like for a vibrator. I agree that swapping two of the wires will reverse the turning direction if the motor does not have Hall Switches or any other kind of commutation.
I realized after you may be referring to RC ESC's controller?
Here is a slightly larger outrunner used in modern washing machines now. **broken link removed**
Max.