Well, I did a little more searching and came up with a solder/de-solder rework kit list. Note that not all the items are considered expendable, e.g. tweezers. Have a look at my list and comment and additions or subtractions. After enough time has passed, I will change the list based on majority input. I am also including this list in pdf format for easy printing.
Solder/De-solder Rework Kit
The following information is a recommended list of solder/de-solder rework (SDR) tools.
The list is not either based on any standard nor is at inclusive. The listed items below are
only recommendations based on the experience of industry professionals. By adding the
items on this list to your SDR station inventory list, your SDR times should see an
improvement as well as the quality of work.
Non Lead Free Kit
Note: May substitute other brands, Chip Quik is simply one of many brands available.
Chip Quik Removal Alloy SMD 4.5 (4.5 ft. removal alloy w/instructions)
Solder Paste - no clean 63/37 rework solder paste w/flux in 1 cc syringe w/nozzle &
cap.
Solder 3 ft. 63/37 2% silver .031 in.
Chip Quik Paste flux- no clean flux in 1 cc syringe w/nozzle & cap. Used for
solder/de-solder.
Liquid flux remover/cleaner - 5 cc container w/applicator. (Nonflammable)
Probe kit - 4 stainless steel dental picks for SMD removal & placement.
Super Wick - no clean - 5 ft.
Handi Vac - SMD pick & place tool / w/tips
Acid brush - qty. 2.
Precision tweezers - for SMD removal & placement.
Cleaning wipers - tight weave / low lint 4"x4" qty. 6 (for cleaning PC board).
Swabs - double ended qty. 10. (For PC board clean up)
Alcohol pads - qty. 6. (for PC board clean up)
Lead Free Kit
Removal Alloy: SMD 8NL - 8Ft. Lead-Free Removal Alloy (w/instructions)
Solder Paste: SMD291SNL - No-Clean Lead-Free Rework Solder Paste.. 9g ..
Sn96/Ag3/Cu.5
Solder Wire: SMD 96 - Lead-Free solder wire .031” Diameter 15Ft. 96Sn/3Cu/.5Ag
Paste Flux: SMD291NL - For Lead-Free Solder & Desolder Rework 5cc syringe
w/handle/tip
Liquid Flux - Remover Cleaner… 1oz. Container w / applicator. Nonflammable
Solder Wick - No clean.. ESD Safe.. 5Ft. .055width
Handi-Vac Tool - SMD pick & place w/3 tips
Acid Brush - qty. 2 3/8 wide
Probe Kit - qty. 4 stainless steel Non Magnetic Dental picks...For SMD removal &
placement
Precision Tweezers - qty. 2 Non-Magnetic, For SMD removal, placement & chip
components
Cleaning Wipes - qty. 6 tight weave / low lint 4 x 4in... For cleaning PC board
Swabs - qty. 10. Double ended for PC board clean up