3 days ago i picked up a new TD10 for my drumset and the smell is not really noticable but its still there.
I used a damp cloth with water to wipe it down good but the smell is still noticeable...
The owner had it with all his equipment in his damp basement for 2 years and it seems to have taken on the smell though the unit itself was only used twice and is like new.
I thought about that Febreeze stuff but im not sure I want to spray that at the unit as it would get into the sliders and distroy the control of them or something.......Maby use some with a cloth and wipe it on?...will that harm any of the print or plastic?
The smell is probably on the inside as well though.
I will take any and all ideas to get rid of this smell.....Thanks.
Hiya moody,
Eh mate you might want to try soda of bicarbonate which you can get from the local supermarket and just put it in a bowl then put it in the drum for a day or so. My wife reckon's that could do the trick for you and it won't cost more than a dollar or so to try it.
i suggest those nifty tree (pinetree) shaped smelly things that normaly hang from a cars rearview miroor. cover the area with those bastards for a week or so and the smell should be gone. nothing wet either.
also i heared in the news that our goverment plans to start planting big ones in the smelly dock and factory regions of our capitol city
dot it all out...opened it all up and cleaned out the shell with one of those computer wipes being careful to ceep it off the clear plastics and words.....worked like a charm...thanks
ill make another post with a few sound samples i just recorded.