Best conductors in sequence:
1: Silver,
2: Copper,
3: Gold,
While gold is third why they use it? they can use use copper for ever, why they tend to gold too? Is that due to this fact that maybe copper corrodes too?
Best conductors in sequence:
1: Silver,
2: Copper,
3: Gold,
While gold is third why they use it? they can use use copper for ever, why they tend to gold too? Is that due to this fact that maybe copper corrodes too?
Best conductors in sequence:
1: Silver,
2: Copper,
3: Gold,
While gold is third why they use it? they can use use copper for ever, why they tend to gold too? Is that due to this fact that maybe copper corrodes too?
Because of its expense, gold is usually only used as a very thin plating on other conductors, such as copper, to prevent corrosion and provide a low contact resistance. The oxides of copper of and silver are non-conductive.
As said above, silver is the best conductor and good BNC connectors have a silver coating. Silver does oxidize, however the black silver oxide is also a conductor. Ag2O.
That said, I have had more intermittent old BNC connectors made with silver than with stainless steel.
Gold connectors are for suckers who buy low oxygen copper cables. However there is a demand for gold connectors and the smart money will satisfy, and profit from, the demand. .....and they won't call their customers "suckers" in front of their faces. That way, everyone is happy.
I guess you learn something new every day, huh? It's easy to find out the truth in Google for technical references or Wikipedia too. You mixed up "conductivity" with "cost of".
I guess you learn something new every day, huh? It's easy to find out the truth in Google for technical references or Wikipedia too. You mixed up "conductivity" with "cost of".
Good quality IC sockets, low level switch contacts and relay contacts are gold plated for excellent reliability. They do not cost more than ordinary silver plated contacts used at higher currents. They are used for switching low level microphones.
My Yamaha stereo has a function switch with silver contacts instead of gold and it is becoming intermittent.
Although silver oxide is a conductor, it's not a good one. And the fact that having silver and silver oxide touching each other creates a bi-metal connection which will start injecting noise into the system like a thermocouple. This is the main reason gold plating is used as it corrodes VERY slowly.
At school, my Chemistry teacher for the last two years or so was a fairly young woman (can't remember her name?) - but we were doing something in the lab when she noticed her engagement ring had turned bright green, and her boyfriend had claimed it was 24 carat!
Trouble is, 24 carat gold is "worthless" for jewelry as it is so soft that rings easily bend out of shape and prongs that are supposed to hold gems in place don't. If she'd known anything about jewelry, the boyfriend's original claim should have been suspect!
Ring alloys are usually 10K for strength. Gold chains are often 18K.
Trouble is, 24 carat gold is "worthless" for jewelry as it is so soft that rings easily bend out of shape and prongs that are supposed to hold gems in place don't. If she'd known anything about jewelry, the boyfriend's original claim should have been suspect!
silver and copper both oxidize badly which degrades the connection. Good connectors use a gold plated copper, cheap ones use tin plated copper which is pretty good for durability (way better than bare copper).