Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Headlight Alternating Relays

Status
Not open for further replies.
It is against the law for your car to impersonate an emergency vehicle.
It is OK for a tiny toy car.
Maybe it is OK for a tiny SMART car, since it is a tiny toy car (hee, hee).

I laugh whenever I see a tiny toy SMART car.
 
It is against the law for your car to impersonate an emergency vehicle.
It is OK for a tiny toy car.
Maybe it is OK for a tiny SMART car, since it is a tiny toy car (hee, hee).

I laugh whenever I see a tiny toy SMART car.

This will not be used on the road. It will be for shows and trackdays only.
 
Anybody know what relays i would need to use to make my Headlights alternate?

Each headlight takes ~3A, surge ~40A. Maybe PN 45-488 from www.hosfelt.com would work: $0.59.

If you have some small current running through both headlights continuously then the surge current will be way less.

You'll need a driver circuit with a coil spike suppressor [a fast diode or an MOV or a resistor], or a smaller relay, that can handle the larger relay coil current.

I'm not affiliated with Hosfelt.
 
The flashing light bulbs will quickly kill the battery.
Have a nice long walk home since the battery will be dead.
 
The flashing light bulbs will quickly kill the battery.
Have a nice long walk home since the battery will be dead.

Assuming the engine is not running, no? The last time I saw those flashy lights was at 80 mph, and the cop had no problem restarting his car after giving me my ticket.
 
If you live in the US, go to the local NAPA auto parts store and purchase a flasher unit for a school bus. That's what I did to make my headlights flash. (I'm on the local Fire Department)
 
I figured it out whilst i was laying in bed last night. Use 2 relays, 1 flasher relay, 1 SPCO relay and 2 diodes.


It will not kill the battery because i made the runlock system that the police cars have too.
 
Last edited:
You can probably buy it cheaper than you could build it :**broken link removed**
Only $19.95 including enclosure and switch.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top