Help me to start 24V BLDC (Star winding)

Status
Not open for further replies.
G

ganeshgovalkar

Member
After lots of research, I brought the below BLDC driver to run my BLDC motor.
I had an order with no hall sensor but unfortunately, it came with a Hall sensor.
Now is there any way to start my BLDC with this driver???




I have connected all the connections as below schematic.



My Actual circuit


From backside

 
Sort by date Sort by votes
If the drive is intended to use Commutation sensors, with no other options in order to switch, then you may not have success with running the motor with this drive.
 
Upvote 0 Downvote
If that is the same motor from your other thread, it had/has an internal ESC or drive. That drive would also need to be disabled. But like Max said, a Hall sensor driver needs Hall sensors to work.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
Best way to put voltage taps on 30a wire on transformer secondary winding?
Replies
14
Views
1K
Nigel Goodwin
D
  • Question
Hot start welding
Replies
5
Views
2K
Reloadron
D
  • Question
Open Loop BLDC motor control, is it possible?
Replies
8
Views
2K
Tony Stewart
X
  • Question
Cold Start Valve Rs Turbo Loom
Replies
5
Views
1K
Xrpaul
X
K
  • Question
BLDC Generator Back Current Protection
Replies
7
Views
3K
Tony Stewart
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…