Help to identify connector

S

Simonavis

New Member

• Feb 8, 2021

• #1

Hi Guys.

Can anyone help to identify this connector and advise of places to purchase along with the board connector to match

I've been looking around and I think its a JST connector but I'm getting confused with the different pitch sizes.

Thanks in advance

Simon

 

Last edited: Feb 8, 2021

gophert

Well-Known Member

Most Helpful Member

• Feb 8, 2021

• #2

What does the bottom side of the connector look like?

 

V

Visitor

Well-Known Member

• Feb 8, 2021

• #3

It might be JST GH series at 1.25mm pitch.

 

S

Simonavis

New Member

• Feb 8, 2021

• #4

Thanks for your replies.

Here is the connection side of the connector.

 

gophert

Well-Known Member

Most Helpful Member

• Feb 8, 2021

• #5

It looks to me like a .05" spacing.
from the left side of the first pin, count 11 pins over to find a mm marker in the exact same position under the pin. That's 14mm away.
14mm/11 pins = 1.27mm = 0.05"

if spacing is 1.25mm, 14mm would be 11.2 pin positions and easily noticeable.

 

S

Simonavis

New Member

• Feb 8, 2021

• #6

Thanks Guys,

It looks like I have now found it and it matches perfectly to the molex picoblade connector.

I got hung up on jst connectors for hours of searching but the note saying the GH is often confused with the picoblade was the key.

Many thanks

Simon

 

V

Visitor

Well-Known Member

• Feb 8, 2021

• #7

Simonavis said:

I got hung up on jst connectors for hours of searching but the note saying the GH is often confused with the picoblade was the key.

Click to expand...

That's exactly why I posted the screenshot. Matching up pictures of the likely choices would narrow it down pretty quickly. Good job Wikipedia!