Hobbyist Oscilloscope

Hello, sorry if it had been asked before. I am looking for a portable little scope but with a screen readable without magnifying glasses. Was thinking if 4" minimum with min analog bw in the order of 1MHz, 2 chans. Any recommendations for a reliable solution?
Thanks in advance for your time

The little Velleman ones are OK for a convenient tool for portable use.

eg. https://www.velleman.eu/products/view/?id=431482&country=be&lang=en
Only single channel but not too bad.

I have the original Velleman one in my kit still, it's fine for quick tests on low frequency gear like machine servo drives.

Beyond that, either the Agilent / Tektronix clones on ebay or the PC or chinese mini scopes.
You can get a good two channel bench scope in the same style as the big name ones for 150-

There is also an actual Tektronix on for a reasonable price at present:
**broken link removed**

Or this? Looks like it takes non-standard leads, no idea on the quality..
https://www.ebay.co.uk/itm/DS203-Po...scope-USB-Interface-8MHz-72MSa-s/253066189280

Thanks, ill go through your recommendations though, since its for Israel, weight is a concern. Meanwhile i found thth thing which looks promising and at a lower cost than the wellman
https://hackaday.com/2017/11/18/ds212-oscilloscope-review-open-source-and-great-for-hacking/
Thanks again

They do look nice!

My velleman has been looking a bit tired with cracks in the plastic over the screen, since someone managed to drop a tool on it off the top of a machine a few years ago.

Those are smaller and neater, small enough to keep in a toolbox rather than a separate case.

I would recommend a Picoscope. https://www.picotech.com/products/oscilloscope

Diver300 said:

I would recommend a Picoscope. https://www.picotech.com/products/oscilloscope

Click to expand...

OP wants a portable scope with a screen.

Yes, i definitely prefer a self contained scope

the tek with duty and shipping is much too expensive and honestly i dont take this maker for a rols royce as far as reliability. As for the ds203 it would be fabricated by sainsmart as the ds212. I think I'll go for the ds212 which has only two Chans but is cheaper. ill report here once i have it and meanwhile thank you all for bothering!