B butterfly New Member Jun 16, 2006 #1 hi; I'm new in lcd.I want to use wg240128b lcd with t6963c controller and using PIC16F877A. ANY HELP OR ADVICE?
hi; I'm new in lcd.I want to use wg240128b lcd with t6963c controller and using PIC16F877A. ANY HELP OR ADVICE?
B butterfly New Member Jun 16, 2006 #3 Thanks For Reply I Wrote A Program With Ccs But I Can Not Make It Work. My Problem Is For Pins ;vo,vee,md2 What Voltage İ Must Apply?
Thanks For Reply I Wrote A Program With Ccs But I Can Not Make It Work. My Problem Is For Pins ;vo,vee,md2 What Voltage İ Must Apply?
Nigel Goodwin Super Moderator Most Helpful Member Jun 16, 2006 #4 butterfly said: Thanks For Reply I Wrote A Program With Ccs But I Can Not Make It Work. My Problem Is For Pins ;vo,vee,md2 What Voltage İ Must Apply? Click to expand... Never used one, try the link above which has a working circuit.
butterfly said: Thanks For Reply I Wrote A Program With Ccs But I Can Not Make It Work. My Problem Is For Pins ;vo,vee,md2 What Voltage İ Must Apply? Click to expand... Never used one, try the link above which has a working circuit.
Oznog Active Member Jun 16, 2006 #5 butterfly said: Thanks For Reply I Wrote A Program With Ccs But I Can Not Make It Work. My Problem Is For Pins ;vo,vee,md2 What Voltage İ Must Apply? Click to expand... Vdd-Vee is about 19v at 25C. Assuming Vdd is +5v, Vee is -14v.
butterfly said: Thanks For Reply I Wrote A Program With Ccs But I Can Not Make It Work. My Problem Is For Pins ;vo,vee,md2 What Voltage İ Must Apply? Click to expand... Vdd-Vee is about 19v at 25C. Assuming Vdd is +5v, Vee is -14v.