V V R New Member Jul 13, 2022 #1 I have designed a 925v input to 24v output buck converter. I am facing a voltage drop to 0v and then it comes to back to 24v how can I get the straight line that is 24v without dropping of voltage in the circuit please anybody help me . Attachments Drone tethering project constant 24 Output.asc 1.4 KB · Views: 308
I have designed a 925v input to 24v output buck converter. I am facing a voltage drop to 0v and then it comes to back to 24v how can I get the straight line that is 24v without dropping of voltage in the circuit please anybody help me .
rjenkinsgb Well-Known Member Most Helpful Member Jul 14, 2022 #2 Look at the output cap - 648 Farads.. Try changing that to uF? Also the FET gate drive voltage should be referenced to the FET source & set to eg. 10V. Upvote 0 Downvote
Look at the output cap - 648 Farads.. Try changing that to uF? Also the FET gate drive voltage should be referenced to the FET source & set to eg. 10V.