killivolt
Well-Known Member
https://www.cdw.com/shop/products/T...P&cm_sp=Product-_-Session&ProgramIdentifier=3
Ok, I have some high price items I'm trying to protect. I'll need something else to protect the network in this particular Cabinet, this unit only has power protection.
The total on the UPS I figured the VA at 3000 is 25amps. My total consumption of the devices in the rack is 23.34 amps, which is below the rated amperage of the UPS, I won't be using backup power supply from the batteries, I only want it to shut down in an emergency or help guard against Spikes and Browns.
I figure the outlets on the Surge side will be the division of 25amps to the 3 outlets? If I'm wrong let me know. However, I'll have
Out 1 = 7.75a
Out 2 = 8.3a
Out 3= 7.29a
If feel I'm cutting it to close, let me know what you think? I would like some input to make sure of this before my purchase. I'll need 2 of these to cover 2 racks with the same equipment.
Thanks,
kv
Ok, I have some high price items I'm trying to protect. I'll need something else to protect the network in this particular Cabinet, this unit only has power protection.
The total on the UPS I figured the VA at 3000 is 25amps. My total consumption of the devices in the rack is 23.34 amps, which is below the rated amperage of the UPS, I won't be using backup power supply from the batteries, I only want it to shut down in an emergency or help guard against Spikes and Browns.
I figure the outlets on the Surge side will be the division of 25amps to the 3 outlets? If I'm wrong let me know. However, I'll have
Out 1 = 7.75a
Out 2 = 8.3a
Out 3= 7.29a
If feel I'm cutting it to close, let me know what you think? I would like some input to make sure of this before my purchase. I'll need 2 of these to cover 2 racks with the same equipment.
Thanks,
kv
Last edited: