I need an ID on a momentary push switch‏, or a Compatible replacement

Here is a picture of the switch a work collegue of mine needs for a spectrum anayliser.

It is approx 8x8mm momentary switch, ~14.5mm height, with two PCB through hole connectors with a 10mm pitch.

A few of them appear to have had their contacts broken inside and are not functioning. Could you advise if you have seen them before or if you know of anything that would be a fitting replacement.

Regards and many thanks

Dan

hi,
This is the closest I can find.

OMRON ELECTRONIC COMPONENTS|B3WN-6002|SWITCH, PCB, SPNO | Farnell United Kingdom

Hi Eric. I'm not sure that they will fit in the PCB but I will pass on the info!

Kind regards

Dan

This might have a wider lead spacing Mini Pushbutton Switch (5)-The Electronic Goldmine. Might not be tall enough....