I need help!!

Status
Not open for further replies.

sciencewhiz102

New Member
I am trying to use a computer (windows ME) to control other electronic devices (such as lights) and activate them either on a timer or when a USB key with special files on it is inserted into a split USB port. :?
 
you must 1st know how to use

programming langagues like :

VisualBasic , C, C++ or Pacsal

& then go to interface the PC with outworld

:wink: :wink:
 
sciencewhiz102 said:
I am trying to use a computer (windows ME) to control other electronic devices (such as lights) and activate them either on a timer or when a USB key with special files on it is inserted into a split USB port. :?
Click to expand...
The easiest way is to use Paralel port to interface with "outworld" from your PC. I can't help you with SW :cry:
 
DTMF said:
the parallel port adress of your PC is

$378
Click to expand...

Possibly? - that's only one of the common standard parallel port addresses, now under Windows there are also many non-standard addresses used as well. The standard addresses are:

$378
$278
$3BC

There's an interrupt call under DOS which gives you all the installed port addresses - Windows specific ports can't usually be used under DOS, but should come with Windows drivers.
 
Nigel Goodwin

i am planning to use parallele & serial port in my final project next year

:lol: :lol: :lol: :lol:

when i start i will need your help

ok :lol:
 
Status
Not open for further replies.

Similar threads

H
  • Question
I need advice for 12vdc resister for warmth
Replies
5
Views
810
Pommie
P
R
  • Question
I need help with a push button...
Replies
11
Views
4K
ZipZapOuch
S
  • Question
Need help with spst toggle to momentary
Replies
5
Views
3K
crutschow
Z
Need some help for a FM LIFI communication
Replies
1
Views
2K
rjenkinsgb
C
Totem pole not driving IGBT, I need help w/picking driver
Replies
3
Views
1K
tepalia02
T
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…