Could someone please give me info on how these are wired? I know the pin outs for the power side, not sure how the switch is wired. Attached image to post.
In the US, I would use the switch to break the Line (black) side. Since you didn't put in a country when you registered, I can not suggest what you would do...
I believe the switch you have switches both the line and neutral conductors, You may need to use an ohmeter to determine how the 4 connections are switched.
On the solder side of your switched receptical, connect a short black wire jumper from L to one side of the switch. Connect the output of the switch to the Line input of the power supply or whatever is in the box to which the receptical is mounted on.Even if the switch is a double pole switch, I would only break the Black Line wire side; not the Neutral.
You should also put a fuse in the long black wire between the switch and whatever load is in the box.