Yes it is. Never thought of that. Below there is a link of the resistor I am using. CGS HSC100 10R. Looked at the datasheet and they have some low induction ones. We dont have any in the labs so i will have to buy one.
https://uk.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=652519&N=401
Now I will have to try this with higher power (6amps 200V) with load a resistor bank 2.4KW. Is there a way to measure the inductance of the bank? or is it better to try and find a better less inductive load (bit hard for such power)?
It is just an IGBT with a resistor on the anode connected on the positive of the supply voltage. Nothing special.
Thank you for your quick reply.