Ok im starting to understand thing somewhat but can you please look at this this is going to be my next project and I only dont understand 2 Values here on the scematic = **broken link removed**
Frequency chart is here:
Frequency Dependent Components
1.8MHz 3.5MHz 7MHz 10MHz 14MHz 21MHz 28MHz
C4 1800pf 1000pf 470pf 350pf 150pf 100pf 91pf
C5 2700pf 1800pf 820pf 610pf 330pf 220pf 180pf
C6 1800pf 1000pf 470pf 350pf 150pf 100pf 91pf
L1 4.80uH 2.75uH 1.40uH 1.05uH 0.70uH 0.46uH 0.35uH
L2 4.80uH 2.75uH 1.40uH 1.05uH 0.70uH 0.46uH 0.35uH
So whats is 0.70uH again how many turns for inbetween the 21-28mhz.... I need c4-c6 and L1/L2 Values for 11 meter band...... Thanks!
i know that this is a push pull amp also. here is the whole page im following:
**broken link removed**
Frequency chart is here:
Frequency Dependent Components
1.8MHz 3.5MHz 7MHz 10MHz 14MHz 21MHz 28MHz
C4 1800pf 1000pf 470pf 350pf 150pf 100pf 91pf
C5 2700pf 1800pf 820pf 610pf 330pf 220pf 180pf
C6 1800pf 1000pf 470pf 350pf 150pf 100pf 91pf
L1 4.80uH 2.75uH 1.40uH 1.05uH 0.70uH 0.46uH 0.35uH
L2 4.80uH 2.75uH 1.40uH 1.05uH 0.70uH 0.46uH 0.35uH
So whats is 0.70uH again how many turns for inbetween the 21-28mhz.... I need c4-c6 and L1/L2 Values for 11 meter band...... Thanks!
i know that this is a push pull amp also. here is the whole page im following:
**broken link removed**