Inchworm not powering up

Hedos said:
Ok, well, do you have an eagle schematic that would show how to hook up a 16 pins PIC (16F628A) with the ICD2 cable so it can be programmed?

The firefly doesn't seem to be an option just right now.
Click to expand...

Hook up the 16F628A exactly like the 16F88 in the firefly schematic. Use a 10K to 22K resistor & a 1N4148 diode on MCLR.
 
William At MyBlueRoom said:
Hook up the 16F628A exactly like the 16F88 in the firefly schematic. Use a 10K to 22K resistor & a 1N4148 diode on MCLR.
Click to expand...

Sounds great, not very complicated after all. Thanks!

I just have one last problem, I don't have a connector for the cable nor do I know where to get one. Any suggestion?
 
Hedos said:
One more thing.. can't seem to find anywhere this "inchworm i type" connector for the cable provided in the kit.. They only provided one connector.

Where could I get such a connector to put on the other end?
Click to expand...
It's a standard socket connector 10pin (2x5) connector. Digikey Part # CKC10T-ND

**broken link removed**
 
Last edited:
Great, thanks. What about the male connectors? That would be useful too. Didn't manage to find them on digikey, do you know its name / part number?
 
You must log in or register to reply here.

Similar threads

  • Question Question
HLVD is not right???
Replies
7
Views
2K
tumbleweed
T
@
  • Question Question
BluePill ADC not working
Replies
2
Views
1K
rjenkinsgb
P
  • Question Question
PIC KIT 3 not able to program dsPIC
Replies
15
Views
2K
Ian Rogers
MPLAB X heads up
Replies
15
Views
15K
Jon Wilder
  • Question Question
PortB pullups not working correctly (using Swordfish basic)
Replies
6
Views
6K
MrDEB
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…