Is my PCB wiring correct?

Hi guys, I have made a MC dev board out of an STM32F33K4T6 and I wanted to know if my PCB wiring is fine. The trace width I have used for this is 0.254mm. I shared another post of the same question, but for some reason, the server is down and I am not able to see the question nor able to reply to it. Please let me know if this board will power on and will I be able to run programs on it? I have attached the schematic and my PCB, I will fill the ground copper area on both top and bottom, but so that you check and verify it, I thought Ill remove it and share it with you.

Thank you

You need at last one ground on U3, U4.

Do not create multiple posts of the same topic, it only causes confusion.

JimB