Hi,
I'm sure that I've done something wrong or misunderstood something and that is the reason for this, but any help would be appreciated!
So, I've assembled (actually breadboarded) the PIC programmer, following
https://www.electro-tech-online.com/custompdfs/2008/11/p16pro40.pdf, leds are blinking and look cool, but when I start flashing pic with winpicprog, it gives an error message about verification failing at address 0.
When I try to read the PIC, buffer gets filled with 3FFF
When I try reading PIC with programmer powered OFF buffer gets filled with 0
When programmer is not connected, WinPicProg doesn't detect port
The pic, which I've used is (or maybe already was) PIC16F628.
WinPicProg is version 1.91
Driver: the one, provided on winpicprog.co.uk
OS: WindowsXP
PC: Dell Inspiron 5000
Hardware _seems_ to be assembled correctly. Any ideas?
-----
Also, tried playing around with Delays in settings. Didn't help.
One extra thing is that I've used 74LS06N, which was, of cause, selected in Hardware settings.
PSU was up to 20V DC