bananasiong
New Member
Hi,
From the datasheet, the recommended R1 is 240
hm:, can I replace this with other value like 270
hm: or 220
hm:? I plan to make a power supply with a 24-0-24v transformer (8VA). I'm using 5k
hm: variable resistor and a 500
hm: variable resistor in series to adjust the output voltage (R2). And a 220
hm: as R1. So I can adjust the voltage up to 30V? I don't use high current, only below 1A.
Thanks
From the datasheet, the recommended R1 is 240
Thanks