I'm beginner and i need to built a Pic based board with real time clock.
The goal is to set into the code a some dates and time and when those occurs PIC will send out a frame on its USART or set one of its output to "1" level.
I'm not able to write the code myself, this is why i'm a existing a project that i would modify to suit my need.
Do you know where i should find this kind of example written in Microchip C18 ?
If this is not school work then what are you going to learn by having someone else write the code for you? If this isn't for learning why don't use a PDA or a date book like most people? What is the output trigger supposed to do?
You do not know what processor or clock chip you want to use. So far you have only hinted at the end use. What about that would cause anyone to be interested enough to spend time doing this for you.
Some of us are willing to help people who help themselves. I, and others, have written code and done some PCB work for posters. But these were cases where the people were activly working on the project. You have not even started.
It still sounds like school to me. 33 is not too old to be in school
Maybe you are thinking we are not exactly helpful. If you want to learn we are will to help. Some of the people helping here started out from the ground floor. It takes work but can be done if you want it to happen.
As suggested by Bill. If you do not want to do the work you should pay to have it done.