Hello, Iam very new with electronics. I am looking for some information for my project. I need help designing a circuit so I can have a company build me some circuit boards.
Here is what iam trying to do.
I have a micro piston pump that I am trying to drive. The pump requires a 12 v dc signal that pulses at 50 hz.
The source of power is from my a snowmobile that puts out 12v dc.
What is the best way to build this circuit to be protected against, some voltage spikes, also the circuit will be soldered directly to the pump and seal into a potting box. So the components need to be able to handle this also. Temps may range from -100 to +120 degrees F. The pump consumes 18w.
Also some referrence for a company that can build this would be great.
Any information will be greatly apprieciated.
Thanks
Here is what iam trying to do.
I have a micro piston pump that I am trying to drive. The pump requires a 12 v dc signal that pulses at 50 hz.
The source of power is from my a snowmobile that puts out 12v dc.
What is the best way to build this circuit to be protected against, some voltage spikes, also the circuit will be soldered directly to the pump and seal into a potting box. So the components need to be able to handle this also. Temps may range from -100 to +120 degrees F. The pump consumes 18w.
Also some referrence for a company that can build this would be great.
Any information will be greatly apprieciated.
Thanks